Skip to content
עברית Order

Parts and assembly in one order.

Upload Gerbers, a BOM and a placement file. The board, the parts and the assembly are priced together on screen.

Gerber, BOM and placement file. One price for the finished board.

  • SMT + THTon the same board
  • 1 or 2assembly sides
  • 3 filesGerber · BOM · placement
  • One pricefor board, parts and assembly

PCB assembly order (PCBA)

Upload Gerber, BOM and a placement file. Component assembly is selected for you under order add-ons, and you can change it — board, components and assembly are priced together.

On this route the price is calculated on screen against the spec you chose, and you can order and pay on the site.

Gerber file

ZIP · RAR · 7Z · up to 50MB
Drag a file here, or click to select Gerber export from KiCad, Altium, Eagle or any other EDA software
The files are used for this order only.
Uploading file
0%
Starting upload
File uploaded successfully.
Board dimensionsmm — read from the file when possible
× mm
Quantity
layers
Base material
Board thicknessmm
Outer copper
Inner copper
Trace width and spacingTrace / Space
נקבע מקובצי ה-Gerber גאומטריית הנחושת שבקבצים היא רוחב המסלול והמרווח בפועל.
Material type / TG
Surface finish
Solder mask color
Silkscreen color
Via coveringVia covering
Electrical test
Gold fingersGold fingers
Castellated holesCastellated holes
Rounded cornersDeburring
Edge platingEdge plating
Outline tolerance
Production file approval
Marking on the board
Production route
Method
Cut type
Rows × columns
×
Carrier frameEdge rails
Spacing between units
Different designs in the panel
Type
Sides
Polishing
Fiducial marksFiducials
Calculating stencil price

Assembly is done from the factory's stock only. A component without sufficient stock will not be included in the order — we will show it here and suggest an available alternative in the same package.

Pick & Place file Required for ordering

The Gerber file does not contain component positions. The placement file (Pick & Place / CPL / Position) is what lets the factory know where each component goes — and thanks to it you'll see your board with the components here in 3D.

Drag the placement file here, or click to select CSV · TXT · POS — Pick & Place export from KiCad, Altium or EasyEDA
Assembly side
THT points per unitComponents with leads — hand soldering. 0 if everything is SMD
Placement approval before assemblyA component placement image is sent for your approval
Component list Still empty
The price shown is an automatic estimate and not a binding offer. The final price will be set after an engineering review of the file and sent for your approval before production; if it changes — you can approve or cancel at no charge. Items produced from a personal file cannot be cancelled after production has started, except for a defect or non-conformity. Full terms and conditions · Cancellation policy
Not sure which stackup to choose? Full stackup guide — all stackups, thicknesses and dielectric constants.

The price of the finished board, not of the bare PCB.

  • Parts go into the same orderThey are sourced from the stock of the manufacturing partner that makes the board. You do not deal with suppliers.
  • Part missing? An alternative in the same packageA line that is out of stock is flagged before payment, with an available alternative for your approval.
  • Placement approval before productionA placement image is sent for your approval, as an option.

Three files, one order.

  • RequiredGerber and drill files.zip · .rar · .7z · 50MBExactly as they come out of your design tool.
  • RequiredBOM, bill of materials.csv · .txt · .tsv · .xlsx · .xlsmManufacturer part number and quantity on every line.
  • RequiredPlacement file.csv · .txt · .pos · .tsvPosition and rotation of every part on the board.

From files to a packed board.

  1. Upload three filesGerber, BOM and placement, on the same screen.
  2. Parts and alternativesEvery line is checked against stock.
  3. One price and a checkAn engineer checks the files before production.
  4. Production, assembly and shippingTo the spec you approved.

Questions before ordering assembly.

Do you also buy the parts?

Yes. The parts are sourced from the stock of the manufacturing partner that makes the board, and go into the same order. Need a part you supply yourself? Write to an engineer before ordering.

What if a part in the BOM is not available?

It does not go into the order. The calculator shows it and offers an available alternative in the same package, and you approve the fit with your design.

Can I order bare boards, without assembly?

Yes. When assembly is not selected under order add-ons, the calculator prices the board only, and you can add an SMT stencil for assembling it yourself. On the assembly page it is selected for you, and you can clear it.

Have a BOM ready?

Upload it with the Gerbers and the placement file, and see a price for the finished board.