Skip to content
עברית Order

Engineering information

PCB Layer Stackup Guide

On this page
  1. What is a "layer stackup", anyway?
  2. Which materials, and what's available for each
  3. 4-layer stackups — 1.6 mm total thickness
  4. 6-layer stackups — 1.6 mm total thickness
  5. How to choose in practice
  6. Dielectric constants for impedance calculation

Last updated: 14 November 2026

What is a "layer stackup", anyway?

A multilayer board is built like a sandwich: copper layers with insulating layers between them — core (Core, a rigid laminate) andprepreg (Prepreg, resin-impregnated glass cloth pressed under heat). The "stackup" defines the order of the layers and the thickness of each one — and with it the distance between a copper trace and its reference plane.

Who does this matter to? If your board has 1–2 layers, or no impedance requirements, choose "No requirement" and move on; the stackup selected is the default, and it is an excellent fit for the vast majority of projects. If you designed controlled-impedance transmission lines (USB, RF, DDR, differential), the stackup must match the one entered in your simulator, because the distance to the dielectric determines the required trace width.

Which materials, and what's available for each

MaterialLayersStackup selectionBest suited for
FR-4 (standard)1–32For 4 and 6 layers (1.6 mm thick) — full choice from the stackups in the tables below; impedance control available from 4 layers and up (±10%)Most projects: digital, analogue, medium power
Aluminium core1Fixed stackup — no selectionHeat dissipation: LED lighting, drivers
Copper core1Fixed stackup; direct heat-spreader contact to the core (pad ≥1×1 mm)Very high power
RF — Rogers / PTFE2Dedicated RF core, 1oz copper — no stackup selectionHigh radio frequencies: antennas, microwave
Flex (polyimide)1–2 · 4Stackup by thickness; 1/3–1oz copper; coverlay and stiffeners optionalFolding interconnects, wearables
Transparent flex (PET)2Fixed stackup, 36 µm copperDisplay and lighting applications

4-layer stackups — 1.6 mm total thickness

Both sides of the board are symmetrical: 35 µm outer copper, prepreg, 15.2 µm inner copper, and a core in the centre. The stackups differ in core thickness and prepreg type:

Top layer — copper35 umprepreg~0.21 mmInner copper15.2 umcore~1.1 mmInner copper15.2 umprepreg~0.21 mmBottom layer — copper35 um
Cross-section of a 4-layer board in the default stackup (-7628). Total thickness 1.6 mm.
Stackup codeCore (mm)Prepreg (outer → inner)Characteristic
AE-4L16-76281.17628Default — identical to the "No requirement" stackup
AE-4L16-7628A0.97628 + 1080
AE-4L16-7628B0.47628 + 2116Thin core — tight coupling between the inner layers
AE-4L16-7628C0.157628Thinnest core
AE-4L16-7628D1.37628Thick core — maximum rigidity
AE-4L16-7628E0.67628
AE-4L16-7628F0.257628
AE-4L16-33131.33313Thin outer dielectric + thick core
AE-4L16-3313A1.1Double 3313
AE-4L16-10801.31080Thinnest outer dielectric
AE-4L16-1080A1.1Double 1080
AE-4L16-21161.32116
AE-4L16-2116A0.62116 + 7628
AE-4L16-2116B0.92116 + 7628
AE-4L16-2116C1.12116 + 1080
AE-4L16-2116D0.72116 + 7628
AE-4L16-2116E0.92116

6-layer stackups — 1.6 mm total thickness

In six layers, the stackup is defined by the sequence of prepregs between the layers:

CopperL1 · 35 umprepregCopperL2core~0.55 mmCopperL3Centre prepregCopperL4core~0.55 mmCopperL5prepregCopperL6 · 35 um
Cross-section of a 6-layer board: two cores and three prepreg gaps — their sequence is what defines the stackup.
Stackup codePrepreg sequence (top → bottom)Characteristic
AE-6L16-33133313 · 2116 · 3313Default — identical to the "No requirement" stackup
AE-6L16-3313C3313 · 1080 ×4 · 3313
AE-6L16-3313D3313 · 1080 · 7628 · 2116 · 7628 · 1080 · 3313
AE-6L16-3313E3313 · 7628 ×2 · 3313
AE-6L16-76287628 ×3
AE-6L16-7628A7628 ×2 · 1080 · 2116 ×2 · 1080 · 7628 ×2
AE-6L16-7628B7628 · 1080 ×4 · 7628
AE-6L16-7628D7628 ×5
AE-6L16-10801080 · 7628 · 1080Thin outer dielectric
AE-6L16-1080A1080 · 3313 · 1080
AE-6L16-1080B1080 · 7628 ×2 · 1080
AE-6L16-21162116 · 7628 ×2 · 2116
AE-6L16-2116A2116 ×4
AE-6L16-2116B2116 · 1080 ×2 · 2116

How to choose in practice

Thick corecore 1.3 mmMaximum rigidity · inner layers far apartThin corecore 0.25 mmInner layers close together · tight coupling
Same total thickness (1.6 mm) — different internal split: the core thickness sets the distance between inner layers L2–L3.
  1. No impedance requirement: "No requirement". You're done.
  2. Impedance requirement on the outer layers: A stackup with a thin outer prepreg (the -1080 / -3313 families) gives narrower traces for the same impedance.
  3. Differential pairs on the inner layers: A thin core (-7628B / -7628C / -7628F) couples L2–L3 tightly.
  4. Mechanical rigidity matters: A thick core (1.3 mm — -7628D / -3313 / -1080 / -2116).
  5. Not sure? Design in the impedance calculator using the dielectric constants in the table below, or contact us with your drawing — we'll point you to the right stackup before you order.

Dielectric constants for impedance calculation

prepregDielectric constant (εr)Character
76284.4The thick, economical cloth — the default
21164.16Intermediate
33134.1Thin
10803.91Thinnest — thin outer dielectric for impedance on narrow traces

Solder mask: εr ≈ 3.8, approx. 30 µm thick over the substrate. Impedance tolerance: ±10%. The stackups above apply to 4- and 6-layer boards at 1.6 mm thickness; for other thicknesses and layer counts the stackup is set automatically per "No requirement", and impedance control is available on request.

Data is correct as of the update date above and may change. The codes on this page are the codes you will see in the order wizard.

An engineering question?

Engineering reply usually within one business day.

Ask an engineer