In short (a summary that does not replace the full Terms): Adam & Eve Technologies operates ane-technologies.com and sells through it made-to-order manufacturing services (PCB manufacturing, PCB assembly, 3D printing and CNC machining from your files, component procurement per your BOM, and custom mechanical parts), ready-made shop products, and engineering services. An order you place on the site is an offer from you; it is accepted only after we have reviewed the files you uploaded. We manufacture to your files and check manufacturability only – not the correctness of your design or its electrical function. Your files remain your property and are kept confidential. Items made specially for you cannot be cancelled once their special production has started, except for a defect, non-conformity, late delivery or other breach by us; ready-made shop items can be cancelled within 14 days of receipt or of receiving the disclosure document, whichever is later, under the Israeli Consumer Protection Law. Our liability is capped at the amount you paid, without prejudice to consumer rights that cannot be waived. These Terms are governed by Israeli law.
1. General and Scope
1.1 These Terms of Use and Sales Terms (the "Terms") govern the use of the website at https://ane-technologies.com (the "Site") and the purchase of the products and services offered on it from Svetlana Sandik, a VAT-exempt sole proprietor (osek patur), registration no. 312758022, trading as Adam & Eve Technologies ("ANE"), located at 61 Chen Boulevard (Sderot Chen), Rehovot, Israel ("ANE", "we" or "us").
1.2 Browsing the Site, opening an account, uploading files or placing an order constitutes acceptance of these Terms, the Cancellations & Returns Policy, the Privacy Policy and the Cookie Policy, all of which form an integral part of these Terms. If you do not agree to these terms, please do not use the Site.
1.3 These Terms are intended for all persons equally, regardless of gender.
1.4 In the event of a conflict between these Terms and any other publication on the Site, these Terms prevail, unless a written individual quotation expressly provides otherwise. Notwithstanding the above, the scope of the licence in model files and file kits is set by the licence shown for the product at the time of purchase, as stated in Section 21.4, and nothing in this Section derogates from a right granted to the Customer by such a licence or from a consumer right that cannot be waived or limited by law.
2. Definitions
2.1 In these Terms, the following words have the following meanings:
- "Customer" or "User" – any individual or legal entity who browses the Site, opens an account on it or places an order through it.
- "Consumer" – a Customer who is an individual purchasing a product or service for use that is mainly personal, domestic or family, as defined in the Israeli Consumer Protection Law, 5741-1981 (the "Consumer Protection Law").
- "Made-to-Order Manufacturing Services" – printed circuit board (PCB) manufacturing, PCB assembly (PCBA), 3D printing from Customer files, CNC machining from Customer files, procurement of electronic components per the Customer's bill of materials (BOM), and manufacturing of custom mechanical parts.
- "Custom-Made Products" – goods manufactured specially for the Customer following the Customer's order, according to files, specifications or requirements supplied by the Customer, including components procured specially per the Customer's BOM.
- "Shop Products" – ready-made, fixed-price products, such as 3D-printed decorative and gift items (lamps, holders, statues and the like), sold in the online shop on the Site.
- "Digital Model Files" – the model files (STL) of Shop Products, sold in the shop for printing at home and delivered as download links after payment, with no printed product and no shipping.
- "Catalogue Mechanical Parts" – standard mechanical parts (such as linear rails, ball screws, aluminum profiles, transmission parts, fasteners, enclosures and sensors) listed in the mechanical-parts catalogue on the Site at the unit price shown on screen, which the Business orders from its suppliers for the Customer after the order is placed. They are not "Custom-Made Products" for the purposes of the right of cancellation.
- "Engineering Services" – schematic review, circuit design or editing and similar engineering services, priced by individual quotation.
- "Customer Files" – any file that the Customer uploads to the Site or delivers to ANE, including Gerber files, drill files, BOMs, pick-and-place files, STL/3MF/STEP files, drawings, 3D models and manufacturing notes.
- "Manufacturing Partners" – subcontractors, workshops and factories in Israel and abroad that carry out part of the production work for ANE and on its behalf.
- "Calculator" – the online pricing tool on the Site that produces a price estimate based on the parameters entered and the files uploaded by the Customer.
- "Business Day" – Sunday to Thursday, excluding eves of holidays, Israeli public and religious holidays and official days of rest.
3. Eligibility and Conditions of Use
3.1 Use of the Site and placing orders is permitted only to persons aged 18 or over who have legal capacity to enter into a binding contract. The Site is not intended for minors.
3.2 A Customer who places an order on behalf of a company or business represents that they are authorised to bind that company or business, and these Terms will apply to that company or business as if it had entered into them itself.
3.3 ANE may, in its reasonable discretion, refuse to provide service to a Customer, suspend or close an account, or cancel an order, including in cases of breach of these Terms, suspected fraud, provision of false details, prohibited use as described in Section 11 below, or where required by law. If ANE cancels an order for reasons other than a breach by the Customer, the full amount paid will be refunded to the Customer.
4. User Account
4.1 Orders may be placed as a guest or through a user account. Opening an account requires providing accurate, complete and up-to-date details.
4.2 The Customer is responsible for keeping their login details confidential and for every action carried out through their account. ANE must be notified without delay of any unauthorised use of the account.
4.3 ANE may delete accounts that have been inactive for an extended period, after giving reasonable notice, subject to the Privacy Policy.
5. The Products and Services
5.1 ANE offers on the Site the Made-to-Order Manufacturing Services, the Shop Products and the Engineering Services described in Section 2 above. The description of the products, materials, finishes and available options appears on the relevant pages of the Site and may change from time to time.
5.2 The technical specifications, capabilities, tolerances, materials and limitations of each manufacturing service are set out on the technical specification pages of the Site (manufacturing specifications) (the "Specification Pages"). The Specification Pages form part of the terms of each order. Production of an item that does not comply with the limits set out on the Specification Pages is not assured, and ANE reserves the right to decline to produce it.
5.3 Images and renderings on the Site are for illustration only. Manufactured products may show slight differences in shade, texture or finish between units and between production batches; these do not constitute a defect as long as the product complies with the Specification Pages.
5.4 Engineering response to enquiries and questions is usually provided within one business day. ANE does not commit to any fixed response, production or delivery times, other than the estimated delivery date communicated to the Customer for each individual order as described in Section 13 below.
5.5 Catalogue Mechanical Parts. For each series the catalogue shows a unit price in ILS, the estimated number of business days until the item leaves the supplier, and the attributes used to select a size. Some supplier part numbers are subject to a minimum order quantity or a fixed pack size, as shown next to the item; the data is displayed as provided by the supplier and may change. The dispatch time from the supplier and the shipping time to Israel are estimates only and not a commitment. Items not in the catalogue may be requested by individual quote through the contact form.
5.6 Digital Model Files. For some Shop Products the Customer may purchase, instead of the printed product, its model files. The files are delivered as download links after payment is received, and for the purposes of Section 6.4 delivery of the links is the order confirmation. ANE is responsible for the files opening and matching their description on the Site. The print result also depends on the Customer's printer, material and print settings, and ANE is not responsible for a result caused by these; this does not derogate from ANE's responsibility for a defect in the file itself. The cancellation terms are set out in Section 4.9 of the Cancellations & Returns Policy.
6. Ordering Process and Formation of Contract
6.1 Calculator price estimate. The price shown by the Calculator is based on the parameters entered by the Customer (such as dimensions, quantity, material, number of layers, finish) and on a preliminary automated analysis of the files. It is a price estimate only, subject to file review as described below.
6.2 The order as an offer. Completing the ordering process on the Site and making payment constitutes an offer by the Customer to purchase the products or services on the terms stated. The automatic confirmation sent to the Customer after payment confirms only receipt of the offer and of the payment; it does not constitute acceptance of the offer.
6.3 File review. Every order for Made-to-Order Manufacturing Services is personally reviewed by ANE before production starts, in order to assess manufacturability (Design for Manufacturability – DFM), the correspondence between the files and the parameters entered in the Calculator, and the technical integrity of the files. This review is not a review of the correctness of the design, of the electrical or mechanical function of the product, or of its fitness for any purpose.
6.4 Acceptance. The contract between the Customer and ANE is formed only when ANE sends the Customer a notice confirming the order and the start of production (or, for Shop Products, confirming dispatch of the product), or when production actually starts, whichever is earlier.
6.5 ANE's right to decline an order. ANE may, in its discretion, decline an order, including in the following cases: (a) the files cannot be manufactured, are missing, corrupted or do not comply with the Specification Pages; (b) the review reveals DFM issues whose resolution the Customer has not approved; (c) the parameters entered in the Calculator do not match the files; (d) the price displayed resulted from a technical error or an obvious clerical error; (e) the requested components or materials are unavailable; (f) the order breaches Section 11 below. In such cases ANE will notify the Customer and, as appropriate, offer to correct the files, approve an updated price or cancel the order. If no agreement is reached or ANE chooses to cancel, the order will be cancelled and the full amount paid will be refunded to the Customer by the same payment method, with no cancellation fee.
6.6 Price update after review. If the file review shows that the actual parameters differ from those entered (for example different dimensions, a different number of layers, a different component count), ANE will notify the Customer of the updated price. Production will start only after the Customer approves the updated price and pays any difference, where required. If the updated price is not approved, the order will be cancelled and the full amount paid will be refunded.
6.7 Individual quotations. Engineering Services, complex mechanical parts and orders not supported by the Calculator are priced by written individual quotation. A quotation is valid for the period stated in it and, if no period is stated, for 14 days from the date it is issued.
6.8 Changes after confirmation. A request to change an order after it has been confirmed is subject to ANE's agreement and may involve an additional charge and a change to the estimated delivery date. Changing files after production has started is not possible, except with ANE's express agreement and on the conditions it sets.
6.9 The Customer is responsible for checking the order details, including the files, quantities, materials, colours and shipping address, before completing the order. ANE relies on the details as provided.
7. Prices, Currency, Taxes and Payment
7.1 Prices on the Site are stated in Israeli New Shekels (ILS). ANE is a VAT-exempt dealer ("osek patur") under the Israeli Value Added Tax Law, 5736-1975, and therefore does not charge VAT: prices displayed on the Site do not include VAT and no VAT will be added to them. The price shown next to each item is the final price payable, except for shipping charges and import charges as set out in Sections 7.2 and 13. Where the Site displays prices in another currency for the Customer's convenience, the charge will be made in ILS unless expressly stated otherwise at checkout, and the exchange rate will be determined by the payment service provider or the Customer's card issuer.
7.2 Prices do not include shipping charges, import duties, customs charges, VAT in the destination country or other charges applicable to international shipments, unless stated otherwise. Shipping charges are shown to the Customer before the order is completed.
7.3 Payment is made through PayPal, which allows payment by PayPal account or by credit or debit card. ANE does not collect or store full card numbers; payment details are processed by PayPal in accordance with its terms and privacy statement. Use of PayPal is subject to the PayPal User Agreement.
7.4 ANE may update the prices on the Site at any time. The binding price is the price confirmed at order confirmation under Section 6, except in the case of an error as described in Section 6.5(d).
7.5 A receipt will be sent to the Customer electronically in accordance with applicable law. As a VAT-exempt dealer, ANE does not issue tax invoices and input VAT cannot be recovered on purchases from the Site.
7.6 ANE may, in cases communicated to the Customer in advance, make large orders or Engineering Services conditional on payment of a deposit.
8. Products Manufactured from Customer Files
8.1 Customer responsibility for files and design
8.1.1 The Customer is solely responsible for the accuracy, completeness and suitability of the Customer Files and of all parameters, specifications and notes provided, including dimensions, tolerances, materials, component values, component orientation, polarity, component part numbers and the matching of footprints to components.
8.1.2 ANE manufactures according to the Customer Files as supplied. ANE does not check or approve the correctness of the design, the electrical, mechanical, thermal or safety performance of the product, its compliance with any standard or regulation, or its fitness for any purpose of the Customer. ANE's file review is limited to manufacturability only, and DFM comments given to the Customer are provided as assistance and do not constitute approval of the design.
8.1.3 A product manufactured in accordance with the Customer Files and the Specification Pages is deemed to conform to the order, even if it does not function as the Customer expected because of an error in the design, the files or the parameters supplied by the Customer.
8.2 Tolerances and specifications
8.2.1 All manufacturing services are subject to the tolerances, limitations and process characteristics set out on the Specification Pages. Deviations within the published tolerances, as well as characteristics inherent to the manufacturing process (such as layer lines in 3D printing, tool marks in CNC machining, slight shade variations in solder mask or material), do not constitute a defect.
8.2.2 If the Customer requires tolerances or requirements beyond the Specification Pages, the Customer must state this in writing before ordering and obtain ANE's written confirmation. In the absence of such confirmation, the Specification Pages apply.
8.3 Component procurement per BOM and PCB assembly
8.3.1 When procuring components per the Customer's BOM, ANE endeavours to purchase the components listed in the BOM from established supply sources. Component availability, prices and lead times vary and are outside ANE's control. If a component is unavailable, ANE will notify the Customer and propose an alternative; a component will be substituted only with the Customer's written approval.
8.3.2 The Customer is responsible for the accuracy of the part numbers, values, packages and quantities in the BOM and for their compatibility with the PCB design.
8.3.3 In PCB assembly, ANE places components in accordance with the pick-and-place file and the Customer's instructions. Unless additional testing services are expressly ordered, assembly includes visual inspection only and does not include electrical or functional testing of the assembled board.
8.3.4 If the Customer supplies its own components for assembly, the Customer is responsible for their condition, correct storage and for supplying reasonable overage to cover production attrition, as detailed on the Specification Pages.
8.4 3D printing and CNC machining
8.4.1 In 3D printing and CNC machining, ANE manufactures from the Customer's model file (STL/3MF/STEP or drawing) in the material, finish and options selected. The Customer is responsible for ensuring that the model is watertight, manufacturable, has sufficient wall thickness and is suitable for the material and process selected.
8.4.2 ANE may, as part of the file review, propose changes to orientation, supports or production parameters to improve manufacturability; changes to the geometry of the model will be made only with the Customer's approval.
8.5 Additional testing
8.5.1 Tests such as electrical testing (E-test) of PCBs, functional tests, dimensional inspection or inspection reports will be carried out only if expressly included in the service selected or ordered separately, and to the extent specified.
9. Intellectual Property in Customer Files and Manufacturing Licence
9.1 All intellectual property rights in the Customer Files and in the designs embodied in them remain the property of the Customer or of the rights holders on whose behalf the Customer acts. ANE acquires no rights in the Customer's designs.
9.2 The Customer grants ANE, and the Manufacturing Partners acting on its behalf, a limited, non-exclusive, non-transferable (except to Manufacturing Partners for the purpose of fulfilling the order), royalty-free licence to copy, store, process, convert and use the Customer Files solely for the purpose of reviewing them, preparing them for production, manufacturing the ordered products, delivering them, handling warranty claims and reorders, and complying with legal requirements.
9.3 The Customer represents and warrants that: (a) the Customer owns the rights in the Customer Files or is lawfully authorised to order their manufacture; (b) manufacturing the products according to the files does not infringe any patent, copyright, design right, trade mark, trade secret or other right of any third party; (c) the files do not contain unlawful content; (d) the files do not breach any confidentiality obligation owed by the Customer to a third party.
9.4 ANE may refuse to manufacture, or stop manufacturing, an item that it reasonably suspects infringes third-party rights, in which case Section 6.5 applies.
9.5 General know-how, working methods, manufacturing processes and general improvements developed by ANE that do not incorporate the Customer's specific designs remain the property of ANE.
10. Confidentiality of Customer Files
10.1 ANE will treat the Customer Files and the accompanying technical information as the Customer's confidential information, will use them solely for the order and for the purposes set out in Section 9.2, and will not publish, sell or transfer them to any third party, except: (a) to Manufacturing Partners, component suppliers and service providers acting on ANE's behalf – only to the extent necessary to fulfil the order and subject to their confidentiality undertakings; (b) as required by a competent authority or court order; (c) with the Customer's consent.
10.2 ANE will not display the Customer's products or designs as work samples, in advertising or in a portfolio, except with the Customer's prior written consent.
10.3 The confidentiality obligation does not apply to information that was or has become public other than through a breach by ANE, or that was lawfully in ANE's possession before it was disclosed.
10.4 We retain order files for reorders and warranty enquiries for up to 12 months from the last order, or for a shorter period as set out in the Privacy Policy. We keep design files submitted for a quote that did not become an order for up to 30 days after the last documented activity on that quote, or for a shorter period if one applies to the file type. You may request earlier deletion.
11. Prohibited Uses, Export Control and Legal Compliance
11.1 It is prohibited to order, upload or request the manufacture through the Site of: (a) weapons, weapon parts, ammunition, explosive charges, detonators or munitions, including parts intended for use in them or for their conversion; (b) devices whose manufacture, possession or use is prohibited by law, including unlawful interception or surveillance devices, devices for circumventing protection measures, jamming communications or committing fraud; (c) items that infringe third-party intellectual property rights; (d) items intended to cause harm to persons or property.
11.2 The Customer represents that the order, the export of the products resulting from it and their import into their destination do not breach Israeli defence and dual-use export control law (including the Defense Export Control Law, 5767-2007, and the Import and Export Order (Control of Dual-Use Goods, Services and Technology Exports)), the export laws of the Manufacturing Partner's country where applicable, and the import laws of the destination country. Where a licence or permit is required, the Customer is responsible for obtaining it, and ANE may require it to be presented as a condition of fulfilling the order.
11.3 ANE may refuse, suspend or cancel an order, without liability, if it reasonably suspects a breach of this Section, and may report to the competent authorities as required by law.
11.4 The Customer is responsible for the compliance of the finished product, including its use, marketing and sale by the Customer, with all laws, standards and regulations applicable to it (such as product safety, electromagnetic compatibility, marking and licensing).
12. Production Through Manufacturing Partners
12.1 Production is carried out by ANE and/or by Manufacturing Partners in Israel and abroad acting on its behalf and under its responsibility towards the Customer. ANE selects Manufacturing Partners in its discretion and remains responsible to the Customer for fulfilling the order in accordance with these Terms.
12.2 The Customer agrees that the Customer Files, the order parameters and the shipping details required (where the product is shipped directly to the Customer) will be transferred to Manufacturing Partners to the extent necessary to fulfil the order, subject to Section 10 and the Privacy Policy.
12.3 The Customer has no direct contractual relationship with the Manufacturing Partners, and ANE does not commit to any particular Manufacturing Partner or place of production, unless otherwise agreed in writing.
13. Delivery, Shipping and Passing of Risk
13.1 Delivery date. The estimated delivery date is communicated to the Customer at the time of ordering or in the order confirmation and relates to each order individually. This date is an estimate only and depends, among other things, on completion of the file review, the Customer's approvals, the availability of materials and components, and the carriers. If a material delay is expected, ANE will notify the Customer, and the Customer may cancel an order whose production has not yet started and receive a full refund; cancellation after production has started because of a delay is available in accordance with the law and the Cancellations & Returns Policy.
13.2 Shipping within Israel. Shipping is carried out by courier companies or postal service to the address provided by the Customer, or by self-collection arranged in advance where that option is offered. Shipping charges are shown before the order is completed.
13.2A Catalogue Mechanical Parts. Catalogue items are shipped to the Customer after they arrive from the supplier or, where applicable, directly from the supplier's warehouse abroad. International shipments may be subject to customs duties, import VAT and fees as set out in Sections 7 and 13.3, which are borne by the Customer unless expressly stated otherwise at the time of the order.
13.3 International shipping. Where ANE offers shipping outside Israel, the Customer is the importer of record in the destination country. All import duties, customs charges, VAT in the destination country, customs brokerage fees and other charges required in the destination country are the Customer's responsibility and are paid by the Customer directly. ANE is not responsible for customs delays. The Customer's refusal to pay such charges or to accept the shipment is treated as non-acceptance by the Customer, and may not entitle the Customer to a refund of shipping charges or of the costs of returning or destroying the product, subject to applicable law.
13.4 Passing of risk. In a transaction with a Consumer, the risk of loss of or damage to the product passes to the Customer upon delivery to the Customer or to a person acting on their behalf. In a transaction with a Customer who is not a Consumer, the risk passes upon handover of the product to the carrier.
13.5 Incorrect address and uncollected shipments. A shipment returned to ANE because of an incorrect address provided by the Customer, failure to collect from a pick-up point or refusal to accept it will be re-shipped in coordination with the Customer upon payment of a further shipping charge, subject to applicable law.
13.6 Partial delivery. ANE may, in coordination with the Customer, deliver an order in parts, without additional shipping charges that were not agreed in advance.
14. Inspection of Products and Notification of Defects
14.1 The Customer must inspect the products on receipt and notify ANE in writing of any visible defect, non-conformity, shortage or shipping damage within a reasonable time and no later than 14 days from receipt, stating the order number and providing a description and photographs. A hidden defect that could not have been discovered by reasonable inspection must be notified within a reasonable time of its discovery.
14.2 External damage to the packaging should, where possible, be documented at the time of delivery with the courier.
14.3 Nothing in this Section derogates from a Consumer's rights under the Consumer Protection Law, the Sale Law, 5728-1968, or any other mandatory law.
15. Product Warranty and Remedies
15.1 Scope of warranty. ANE warrants that the products will conform to the Customer Files, the approved parameters and the Specification Pages, and will be free from manufacturing defects in material and workmanship. For Shop Products, ANE warrants that they conform to their description on the Site and are free from manufacturing defects.
15.2 What is not covered. The warranty does not cover: (a) non-conformity or failure resulting from an error in the Customer Files, the design, the BOM, the parameters or the instructions supplied by the Customer; (b) deviations within the tolerances on the Specification Pages and characteristics inherent to the process; (c) damage occurring after delivery due to improper use, soldering, processing, modification, improper storage, abnormal environmental conditions or normal wear; (d) components supplied by the Customer; (e) the product's fitness for any particular purpose of the Customer.
15.3 Remedies. If a product is found not to conform as described in Section 15.1, ANE may, at its option and within a reasonable time, re-manufacture the product or its defective part, or refund the Customer the price paid for the defective product (or the proportionate part of it), provided that the Customer notified the defect as described in Section 14 and allowed ANE to examine the product (including by means of photographs, or by returning it at ANE's expense, at ANE's request).
15.4 Nothing in this Section derogates from a Consumer's rights under the Consumer Protection Law and its regulations, including cancellation rights for defects and non-conformity, or from any other mandatory warranty obligation under applicable law.
16. Limitation of Liability
16.1 To the maximum extent permitted by law: (a) ANE's total liability to the Customer in connection with a particular order, whether in contract, tort or otherwise, will not exceed the amount paid by the Customer to ANE for that order; (b) ANE will not be liable for any indirect, consequential, special or punitive damage, loss of profit, revenue, data, goodwill or business opportunity, costs of procuring substitute products, costs of components supplied by the Customer or of work performed by the Customer on the products, delays or production downtime, even if advised of the possibility of such damage.
16.2 ANE is not liable for damage resulting from the function, safety or compatibility of a product manufactured to the Customer's design, including damage to equipment to which the product is connected, since ANE does not review the design.
16.3 The Site, the Calculators and their content are provided "as is". ANE does not warrant that the Site will operate without interruption or error, or that the price estimates or automated file analysis will be accurate; the final assessment is made in the personal review under Section 6.
16.4 Exceptions. Nothing in these Terms limits or excludes: (a) Consumer rights that cannot be waived under the Consumer Protection Law, the Sale Law, the Standard Contracts Law, 5743-1982, or any other mandatory law; (b) liability for bodily injury or death; (c) liability for fraud or wilful misconduct; (d) any other liability that cannot be limited by law. The limitations of liability apply only to the maximum extent permitted by law.
17. Indemnity
17.1 A Customer who is not a Consumer will indemnify ANE against any claim, demand, damage, expense or loss (including reasonable legal fees) arising from the Customer's breach of Sections 9 or 11, from an allegation that manufacturing the products from the Customer's files infringes third-party rights, or from the Customer's use, marketing or sale of the products. ANE will notify the Customer of any such claim and allow the Customer to defend it, in coordination with ANE.
17.2 A Customer who is a Consumer is subject to such an indemnity obligation only to the extent permitted by law.
18. Force Majeure
18.1 ANE will not be in breach of these Terms and will not be liable for delay or non-performance resulting from circumstances beyond its reasonable control, including war, hostilities, state of emergency, large-scale reserve mobilisation, strikes, natural disaster, epidemic, governmental or regulatory restrictions, disruptions to international shipping or customs, global shortages of components or raw materials, failures of communications or power infrastructure, and failures of Manufacturing Partners or carriers caused by such circumstances.
18.2 In such a case ANE will notify the Customer as soon as practicable, and performance dates will be postponed for the duration of the circumstances. If the delay continues for more than 60 days, either party may cancel the order by written notice, and ANE will refund the Customer the price paid for the part not delivered. Nothing in this Section derogates from a Consumer's cancellation and refund rights under applicable law.
19. Cancellations and Returns
19.1 Cancellation of transactions, return of products and refunds are handled in accordance with ANE's Cancellations & Returns Policy (Cancellations & Returns Policy), which forms an integral part of these Terms and implements Sections 14C, 14C1 and 14E of the Consumer Protection Law.
19.2 In summary: products manufactured specially for the Customer according to the Customer's files or specifications cannot be cancelled under Section 14C of the Law once their special production has begun, except for defect, non-conformity, late delivery or other breach by ANE; until the start of production they may be cancelled subject to the statutory cancellation fee. Order confirmation by itself does not take away a cancellation right the Consumer has by law. Shop Products may be cancelled within 14 days of receipt or of receiving the disclosure document, whichever is later, on the conditions set by law. Digital Model Files cannot be cancelled once the download links have been delivered to the Customer, except for defect or non-conformity, as set out in Section 4.9 of the Cancellations & Returns Policy.
20. Engineering Services
20.1 Engineering Services (such as schematic review and circuit design or editing) are provided under an individual quotation defining the scope of work, deliverables, price and payment terms. The quotation, together with these Terms, constitutes the agreement for the service.
20.2 The deliverables of Engineering Services (such as review comments and edited design files) are delivered to the Customer for the Customer's use. Unless otherwise agreed in writing, intellectual property rights in deliverables created specifically for the Customer are assigned to the Customer upon payment of the full price, while ANE's general know-how, libraries and generic design elements remain ANE's property and are licensed to the Customer for use in the project.
20.3 Engineering Services are provided with reasonable skill and care. A review or design does not constitute a compliance approval, safety test, certification or assurance that the final product will function or meet any standard. Responsibility for verifying, testing and obtaining regulatory approval of the design remains with the Customer.
20.4 Cancellation of Engineering Services is subject to the Cancellations & Returns Policy and to Section 14C(c)(2) of the Consumer Protection Law.
21. Intellectual Property in the Site and Its Content
21.1 All rights in the Site and its content – including design, text, images, videos, logo, trade marks, the Calculators, software code, databases and the content of the Specification Pages – belong to ANE or to third parties who have licensed their use to ANE, and are protected by intellectual property laws in Israel and worldwide.
21.2 No part of the Site may be copied, reproduced, distributed, published, publicly displayed, reverse-engineered or used to create derivative works without ANE's prior written consent, other than reasonable personal use for the purpose of purchasing on the Site.
21.3 The designs of the Shop Products are the property of ANE (or of creators who have licensed their use to ANE). Purchasing a Shop Product does not confer any right to copy, reproduce or manufacture it.
21.4 Licence in model files. Model files and file kits delivered to the Customer – whether purchased as digital files or delivered with a Shop Product that was ordered – are provided under a non-exclusive and non-transferable licence whose scope is the one shown for the product at the time of purchase (on the product page, in the order details and in the README file included with the files). Where a personal-use licence was shown, the Customer may, as an exception to Section 21.3, make copies of the product from the files for the Customer's personal use, and copies made from them may not be sold. Where a licence permitting the making and sale of the finished products was shown, the Customer may also sell the products made from the files. In every case the files themselves may not be transferred, distributed, published or sold. Where no licence was shown for the product at the time of purchase, the licence is for personal use. A change to this Section does not derogate from a licence granted in an earlier purchase, which continues to apply as shown at the time of that purchase. The rights in the design remain with ANE or with the creators referred to in Section 21.3.
22. User Conduct
22.1 The User undertakes not to: (a) use the Site for any unlawful purpose; (b) upload files containing malicious code; (c) attempt to access the Site's systems, other accounts or data not intended for the User; (d) operate bots, scrapers or automated means to collect information from the Site or to overload the Calculators; (e) impersonate any person or entity; (f) interfere with the proper operation of the Site.
22.2 ANE may block access to the Site and take any lawful measure against a User who breaches this Section.
23. Links and Third-Party Services
23.1 The Site may contain links to third-party websites or services (such as PayPal, carriers, component manufacturers' documentation). ANE does not control these sites, is not responsible for their content, policies or services, and a link does not constitute an endorsement.
23.2 Payment services are provided by PayPal under its terms. Disputes relating to the payment process itself may also be referred to PayPal, without prejudice to the Customer's rights against ANE.
24. Privacy
24.1 The collection and processing of personal data by ANE is carried out in accordance with the Privacy Policy (Privacy Policy) and the Cookie Policy (Cookie Policy), which form an integral part of these Terms.
25. Changes to These Terms
25.1 ANE may update these Terms from time to time. The updated version will be published on the Site with its update date. A material change will be brought to the attention of account holders by a notice on the Site or via the contact details they provided.
25.2 An order is governed by the version of the Terms in force at the time it was placed. Continued use of the Site after a change is published constitutes acceptance of the updated version.
26. Governing Law, Jurisdiction and International Customers
26.1 These Terms, the use of the Site and every transaction made through it are governed exclusively by the laws of the State of Israel, without regard to its conflict-of-laws rules. The United Nations Convention on Contracts for the International Sale of Goods (CISG) does not apply.
26.2 The competent courts of the Central District, Israel, have exclusive jurisdiction over any dispute relating to these Terms. This does not derogate from a Consumer's statutory right to bring a claim in another competent court in Israel, including a small claims court.
26.3 Customers outside Israel. If the Customer is a Consumer residing in a country whose mandatory consumer protection provisions apply (for example, in the European Union or the United Kingdom), the choice of Israeli law does not deprive the Customer of the protection afforded by those provisions where they apply to the transaction by law, including cancellation rights, warranty rights and the right to bring a claim in the Customer's country of residence. ANE does not direct its activities to any particular country outside Israel, and international shipping is offered where available.
26.4 The parties will attempt to resolve any dispute by discussion before taking legal action.
27. Miscellaneous
27.1 Language. These Terms are published in Hebrew and in English. In the event of a conflict, the Hebrew version prevails, except for a Customer who does not read Hebrew and whose transaction was made through the English version of the Site, for whom the English version prevails.
27.2 Severability. If any provision of these Terms is held invalid or unenforceable, the validity of the remaining provisions is not affected, and the provision will be interpreted as closely as possible to its original intent to the extent permitted by law.
27.3 No waiver. ANE's failure to enforce a right is not a waiver of that right.
27.4 Assignment. The Customer may not assign its rights or obligations under these Terms without ANE's consent. ANE may assign its rights and obligations to a party acquiring its business, upon notice to the Customer, provided that the Customer's rights are not adversely affected.
27.5 Entire agreement. These Terms and their annexes, together with the order details and confirmation and any written individual quotation, constitute the entire agreement between the parties on their subject matter.
27.6 Notices. Notices from ANE to the Customer will be sent to the contact details provided in the Customer's account or order and are deemed delivered on the Business Day following their dispatch. Notices to the Customer under these Terms may also be given by updating the order status in the user account.
28. Contact
28.1 For questions, enquiries and notices under these Terms, you can contact us:
- Adam & Eve Technologies – Svetlana Sandik, a VAT-exempt sole proprietor (osek patur), registration no. 312758022
- Address: 61 Chen Boulevard (Sderot Chen), Rehovot, Israel
- Phone: 054-5753184
- Contact form on the Site: https://ane-technologies.com